產品描述
E1-UV381S 是一款單面防靜電 UV膠帶, 具有較高的初始粘性, 經過 UV 照射后膠 面粘性大大降低,可以很輕松剝離。
產品結構
E1-UV381S
產品特性 |
-透明離型膜 -亞克力壓敏膠 -PET 膜 - 防靜電涂層 |
令 優異的防靜電性能 令 瞬時粘接強度高,UV 減粘后元器件易移除無殘膠 令 符合 ROHS 要求 產品應用 |
該產品可應用各種硅晶、陶瓷電容、 PCB 板切割定位保護。
性能參數
測試項目 | 測量標準 | 測試方法 | |
基材厚度(μm) | 100±2 | 千分尺 | |
產品厚度(除離型膜) (μm) | 120±5 | 千分尺 | |
180°剝離力 (N/25mm) | UV 照射前 | >6 |
依據 GBT 2792-2014 |
UV 照射后 | <0.3 | ||
表面阻抗 (ohms) | 非膠面 | 106-9 | 表面阻抗儀 |
拉伸強度 (KN/m) | 橫向 | 8 |
依據 GBT 30776-2014 |
縱向 | 8 | ||
伸長率 (%) | 橫向 | >45 | |
縱向 | >45 |
◎ UV 照射的條件: UV 照射能量 500-600 mj/cm2 ,主波長 365nm
儲存方法
儲存條件: 10-30 ℃, 相對濕度 40-70%且黑暗不透光的條件 保質期為 6 個月。 注意事項 | |
令 令 令 |
產品應遠離熱源和火源; 被貼物表面應清潔、干燥、無油污或其他污染; 產品不可在戶外使用, 避免戶外天氣影響造成膠帶移除時會有殘膠留在被 貼物上。 UV tape Application: 1. Wafer, component, glass cutting and grinding process cutting. 2. 3D glass bonding process, component packaging transfer. 3. Soft lithium battery protection, metal and anti-static protection.
Storage: 1. Store under normal conditions of 10-30℃ and 40-70% R.H, out of direct sunlight. 2. Shelf life: 12 months from the date of manufacture when stored in initial packing.
Precaution Reminder: 1. Surface should be clean, dry, free of dust, oil or other contaminants. 2. Proper pressure required by roller, side channel blower hand or press when applying. 3. Avoid repeat sticking to prevent adhesion decrease.
Why choose us? 1. Provide samples and best service. 2. Good production capacity and fast delivery.
Why buy from us instead of buying from other suppliers? 1. Good location and convenient transportation. 2. Good reputation and after-sales service team.
Notes: Please be advised that this technical data sheet is written based on our lab tests and experience only. Customer is responsible to determine the suitability of the product meets intended application requirements before approved for use. |
備注:以上數據為實驗室標準測得可能因使用者的使用條件、方法的不同實際數據會有所差異,建議使用 前對產品進行測試
欲了解更多信息,請致電 0755-82949965 或訪問我們的網站www.khj.cn 耐高溫膠帶 UV膠帶